Factory price 300W/350W/400W/480W IP67 Waterproof IK10 Road Pedestrian Railway Mining Industrial tunnel Underground parking lot Light LED Flood Light Tunnel Light
1.Perfect module design, using 5mm tempered glass, waterproof level meets IP67, allows to combine 1~4 modules according to actual needs of projects;
2.Professional secondary optical design, specially designed for solar street light, maximizing the balance of individual parameters, while minimizing the color reproduction caused by secondary optics.
3.A new generation high brightness outdoor led, lower current drive. The whole lighting efficiency increased by about 10%, and lower light decay.
4.Equipped with an independent power supply chamber, supports independent lightning protection requirements;
5.Stainless steel shell is optional to prevent galvanic corrosion in extreme environments
6.All connectors are tool-free waterproof plug-in design.
7.Installation is simple and convenient. Two mounting brackets are available. The ceiling bracket and the side-mounted bracket can be selected according to project requirements;
8.Reinforced insulation design, supporting CLASS I , CLASS II
9.Compatible with tunnel-specific zhaga interface design, high compatibility.
| Power | 40w | 50w | 60w | 80w | 100w |
| Luminous Flux | 5600±5%lm | 7000±5%lm | 8400±5% lm | 11200±5% Im | 14000±5%lm |
| LED Quantity | 48 pcs | 48 pcs | 48 pcs | 48 pcs | 48 pcs |
| Luminous Efficacy | 150 lmw | 140 lmw |
| LED | 5050 |
| Module Quantity | 1module |
| Power | 120w | 150w | 180w | 200w | 240w |
| LumInous flux | 16800±5%lm | 21000±5% lm | 25200±5% lm | 28000±5%lm | 33600±5%Im |
| LEDquantity | 48 pcs | 96 pcs | 96 pcs | 96 pcs | 96 pcs |
| Luminous EffIcacy | 140 lmw | 140lmw |
| LED | 5050 | 5050 |
| Module Quantity | 1 module | 2 modules |
| Power | 270w | 300w | 350w | 400w | 450w |
| Luminous flux | 37800±5% lm | 42000±5%lm | 48000±5% lm | 56000±5% Im | 63000±5% lm |
| LEDquantity | 144pes | 144 pCs | 192 pcs | 192 pG | 192 pcs |
| Luminous Efflcacy | 140 lmw | 140lmw |
| LED | 5050 | 5050 |
| Modulo Quantity | 3 modules | 4 modules |
| color | Warm White | Natural White | Cold white | Cold white |
| color temperature | 3000±300K | 4000±300K | 5000±300K | 5700±300K |
| color rendering index | ÿ70 |
| Beam angle | 85°x155°; 102°x155°; 125°x148°; 23°x105° |
| Main material | Alloy aluminum, optical PC, stainless steel |
| Service life | >80000h |
| Storage temperature | -30°C~+60°C |
| Operating temperature | -30°C~+50°C |
| input frequency | 47~63HZ |
| Input voltage | 100~240V AC |
| Model | Power | Module
ty | PACKING(LxWxH) | A | B | EPA | Weight | Packaging size
(x w x h) |
| MFTL-T9-040 | 40W | 1pc | 558*430*104.5 | 402.5mm | 524mm | 0.2399m' | 8.92kg | 540*395*120(mm) |
| 8.92kg |
| MFTL-T9-050 | 50W |
| MFTL-T9-060 | 60W | 9.03kg |
| MFTL-T9-080 | 80W | 9.03kg |
| 9.03kg |
| MFTL-T9-100 | 100W |
| MFTL-T9-120 | 120W | 9.16kg |
| MFTL-T9-150 | 150W | 2pcs | 748*430*104.5 | 402.5mm | 714mm | 0.3216m3 | 11.30kg | 730*395*120(mm) |
| MFTL-T9-180 | 180W | 11.34kg |
| MFTL-T9-200 | 200W | 11.34kg |
| MFTL-T9-240 | 240W | 11.51kg |
| MFTLT9-270 | 270w | 3 pcs | 938*430*104.5 | 402.5mm | 904mm | 0.4033m' | 14.30kg | 920*395*120(mm) |
| MFTL-T9-300 | 300w | 14.30kg |
| MFTL-T9-350 | 35ow | 4pcs | 1128*430*104.5 | 402.5mm | 1094mm | 0.4850m3 | 16.28kg | 1110*395*120(mm) |
| MFTL-T9-400 | 4oow | 16.32kg |
| MFTL-T9-450 | 450w | 16.49kg |
Installation Instructions
Installation Steps: 1. Use 4 M10 bolts to install the lamp on the bridge as shown in the picture;
2. Connect the waterproof connectors of the lamps, correctly connect the power cord to the puncture clamp, and then connect it to the AC power supply cord (see wiring steps for details);
3. Adjust the lamp to the position according to the actual lighting needs of the site, and then tighten the bolts;
4. Adjust the dimming line settings according to on-site needs (not required for non-dimming);
Note: The power supply cable must ensure even distribution of the three-phase load.
If the product does not contain dimming cable: Please adapt the cable outer diameter φ7-9mm by yourself, strip the wire 15mm, and expose 5mm copper;
FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.
Q2: Can I order a sample of the LED High Mast Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.
Q3: What is the lead time for the LED High Mast Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.
Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).
Q5: Can I print my logo on the LED High Mast Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.
Q6: How do I proceed with an order for the LED High Mast Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.
Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.
